LORD Sensing無線傳感器網絡可通過可擴展的傳感器網絡實現同步，高速傳感和數據聚合。我們的無線傳感系統是測試和測量，遠程監控，系統性能分析和嵌入式應用的理想選擇。

SG-Link?-200-OEM允許用戶遠程收集各種傳感器類型的數據，包括應變儀，壓力傳感器和加速度計。該節點支持1個差分和1個單端輸入通道的高分辨率，低噪聲數據采集，采樣率高達1 kHz。數字輸入允許兼容性。

帶有霍爾效應傳感器，用于報告RPM和總脈沖，使傳感器成為許多扭矩傳感應用的理想選擇。

用戶可以使用SensorConnect軟件輕松地對節點進行連續，周期性突發或事件觸發采樣的編程?？蛇x的基于Web的SensorCloud接口可優化來自遠程網絡的傳感器數據的數據聚合，分析，演示和警報。

產品亮點

• 1個差分輸入通道和1個單端輸入通道

• 差分通道兼容120,350和1k歐姆惠斯通電橋感應電路

• 板載溫度傳感器

• 用于RPM和脈沖計數的數字輸入通道

• 供電電壓范圍為3.3至30 V.

• 連續，周期性突發和事件觸發采樣

• 輸出原始數據和/或衍生通道，如平均值，RMS和峰值峰值

• LXRS協議允許無損數據收集，可擴展網絡和±50μs的節點同步

• 使用板載分流電阻進行遠程應變校準

  
  

功能和好處

高性能

• 高達1024 Hz的采樣

• 低噪聲1.5或2.5 V傳感器激勵

• 噪聲低至1μVpp

• 高分辨率24位數據

• 數據記錄最多800萬個數據點

• 低功耗操作，適合電池供電的應用。

• 無線范圍可達1公里（典型值400米）

• -40至+ 105°C的工作溫度范圍

應用

• 應變，載荷，力，壓力，加速度，振動，位移或扭矩傳感。

• 基于狀態的監測

• 結構載荷和應力監測

• 測試和測量

• RPM和脈沖計數

LORD Sensing Wireless Sensor Networks enable simultaneous, high-speed sensing and data aggregation from scalable sensor networks. Our wireless sensing systems are ideal for test and measurement, remote monitoring, system performance analysis, and embedded applications.

The SG-Link?-200-OEM allows users to remotely collect data from a range of sensor types, including strain gauges, pressure transducers, and accelerometers. The node supports high resolution, low noise data collection from 1 differential and 1 single-ended input channels at sample rates up to 1 kHz. A digital input allows compatibility 

with a hall effect sensor for reporting RPM and total pulses, making the sensor ideal for many torque sensing applications.

Users can easily program nodes for continuous, periodic burst, or event-triggered sampling with the SensorConnect software. The optional web-based SensorCloud interface optimizes data aggregation, analysis, presentation, and alerts for sensor data from remote networks.

PRODUCT HIGHLIGHTS

• 1 differential and 1 single-ended input channel

• Differential channel compatible with 120, 350, and 1k Ohm Wheatstone bridge sensing circuits

• On-board temperature sensor

• Digital input channel for RPM and pulse counting

• Supply power from 3.3 to 30 V

• Continuous, periodic burst, and event-triggered sampling

• Output raw data and/or derived channels such as mean, RMS and peak-peak

• LXRS protocol allows lossless data collection, scalable networks and node synchronization of ±50 μs

• Remote strain calibration using on-board shunt resistor

FEATURES AND BENEFITS 

HIGH PERFORMANCE

• Up to 1024 Hz sampling

• Low noise 1.5 or 2.5 V sensor excitation

• Noise as low as 1 μV p-p

• High resolution 24-bit data

• Datalog up to 8 million data points

• Low power operation, well-suited for battery powered applications.

• Wireless range up to 1 km (400 m typical)

• -40 to +105°C operating temperature range

APPLICATIONS

• Strain, load, force, pressure, acceleration, vibration,displacement, or torque sensing.

• Condition-based monitoring

• Structural load and stress monitoring

• Test and measurement

• RPM and Pulse counting